The 2010 Corvette promos were manufactured by DoAllSer Company for Ivy Promotions. Both coupes and convertibles were produced this year. The 2010 convertible bodies were made from the same molds as the 2008-2009s. The coupe bodies were essentially the same as the convertibles except for the roof. The bodies were molded as 1 piece of white plastic with separate bumpers, mirrors and hood. The convertible bodies were painted "Torch Red". The coupe bodies were painted "Blade Silver Metallic". Both cars had a red Chevy bow-tie on the rear license plate. The clear plastic windshields were permanently attached to the underside of the body. The interior tub, seats, dash, shifter, door panels, steering wheel and steering column were all separate pieces. These parts formed the interior assembly. The interior assembly was inserted into the underside of the body and held in place by the chassis. The 2010 Corvette promos had the same style chrome plated 5 spoke wheels as the 2008-2009 Corvette promos. The blackwall tires had no lettering molded into the sidewall. The chassis was molded in black plastic and attached to the body with 4 black philips head screws.
Boxes: The 2010 Corvette promos came in window boxes with red and black artwork.
Note: The interiors of 2008 and newer C6 Corvette promos are very easy to interchange. This website shows all the factory interior/exterior combinations for 2008 and newer Corvette Promos. Any combination not shown on this website was altered after it left the factory.
Note: There are additional 2010 Corvette promos located in the "Test Shots" section of this website.
Note: DoAllSer also made 2010 Corvette Convertible Kits (marketed by AMT). These kits assembled just like promos. They're located in the "Snap Kits" section of this website.
Home | Annual Issues | Special Issues | Concept Issues | Test Shots | Pace Cars | Displays | Plaques | Trophies | Masters
Event Cars | Scale Dreams | Memory Lane | Snap Kits | Promo Tips | Acknowledgements | Comments | Links | Sponsors